60-1200 NG Performance Specifications
Exceptional Force * Reliable Results

Power Train
Engine	Deutz TCD914LO6 Tier III Diesel
Rating	174 HP (130 kW)
Maximum Engine Speed	2300 RPM
Engine Torque	373 ft-lbs. (505.7 Nm)  2300 RPM  468 ft-lbs. (634.5 Nm) 1600 RPM
Maximum Noise Rating	106 dB(A)
Fuel Capacity	39 U.S. Gallons (148 L)
Hydraulic Capacity	22 U.S. Gallons (83 L)
Battery	(1) Deka 634MF 12 V,  690 CCA
Transmission
Type	Eaton FS-5205A
Transmission Ratios	Gear Ratio 1St Gear 7.52:1 2ND Gear 4.35:1 3RD Gear 2.54:1 4th Gear 1.52:1 5TH Gear 1.00:1 Reverse 6.27:1
Clutch	Spring Applied with 14 in. (356 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator
Gearbox
Ratio	38.8:1
Torque & Speed
Torque Requirements (2300 RPM)	Gear Output Max. Speed 1st 108,832 ft-lbs. (147,600 Nm) 8 RPM 2nd 62,955 ft-lbs. (85,360 Nm) 14 RPM 3rd 36,760 ft-lbs. (49,840 Nm) 23 RPM 4th 21,998 ft-lbs. (29,830 Nm) 39 RPM 5th 14,472 ft-lbs. (19,620 Nm) 59 RPM Reverse 90,742 ft-lbs. (123,000 Nm) 9 RPM *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss
Torque Requirements (1600 RPM)	Gear Output Max. Speed 1st 136,551 ft-lbs. (185,089 Nm) 5 RPM 2nd 78,989 ft-lbs. (107,100 Nm) 9 RPM 3rd 46,122 ft-lbs. (62,530 Nm) 16 RPM 4th 27,601 ft-lbs. (37,420 Nm) 27 RPM 5th 18,158 ft-lbs. (24,620 Nm) 41 RPM Reverse 113,853 ft-lbs. (154,353 Nm) 7 RPM *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss
Hydraulic System
Maximum Thrust	1,200,000 lbs. (544 Tonnes)
Hydraulic Pump	Axial Piston Pump with Load Sensor
Gear Pump	100cc Piston
Maximum Pump Pressure	4,750 psi (327 bar)
Maximum Pump Output	38 U.S. Gallons (144 L)/minute
Hydraulic Motors	(2) 60 CIR, LSHT, TPR
Hydraulic Push Bar Cylinder	(1) 2 in. Bore x 4 in. Stroke (51 mm x 102 mm)
Hydraulic Clutch Cylinder	(1) 1 ½ in. Bore x 4 in. Stroke (38 mm x 102 mm)
Hydraulic Thrust Cylinder	(3) 9 in. Bore x 35 in. Stroke (229 mm x 889 mm)
Hydraulic Suction Strainer Filter	Suction Strainer with 100 Mesh Screen
Hydraulic Return Filter	High Pressure Return Filter to 6 Micron ABS with Replaceable Element
Master Pusher
Diameter	60 in. (1,524 mm)
Working  Range	24 in. – 60 in. (610 – 1,524 mm) Casing Diameter
Hex Drive	5 in. (127 mm)
Quik Split™	Quik Tran™
The Quik Split™ frame design allows the machine to be separated into sections to accommodate lighter and fasters lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning	Quik Tran™ is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Tran's benefit will be easier machine operation in challenging work climates or conditions.
Spoil Door
With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber.
Dimensions
Length	14 ft. 7 in. (4.43 m)
Width	7 ft.1 in. (2.16 m)
Height	7 ft. 5 in. (2.27 m)
Master Track Length	15 ft. (4.57 m) w/1 1/2 in. (38 mm) back plate
Master Track Width	7 ft. 4 in. (2.23 m)
Centerline	36.02 in. (915 mm)
Extension Track Length	10 ft. (3 m)
Extension Track Width	7 ft. 4 in. (2.23 m)

Weights
Base Unit (Split Weight)	10,387 lbs. (4,711 kg)
Power Pack (Split Weight)	8,058 lbs. (3,655 kg)
Master Pusher	2,047 lbs. (929 kg)
Master Track	7,050 lbs. (3,198 kg)
Lifting Sling	490 lbs.  (222 kg)
Total Weight	28,032 lbs. (12,720 kg)
Extension Track	4,000 lbs. (1,814 kg) each
Master Saddle	320 lbs. (145 kg)
Misc.
Work Lights	(3) 12 Volt