|
|
Power Train |
|
Engine |
Deutz TCD914L06 air-cooled, diesel |
|
Rating |
174 HP (143 kW) |
|
Maximum Engine Speed |
2500 RPM |
|
Engine Torque |
|
|
Fuel Capacity |
39 U.S. Gallons (148 L) |
|
Hydraulic Capacity |
22 U.S. Gallons (83 L) |
|
Battery |
One, Deka 634MF, 12 V, 690 CCA |
|
Transmission |
|
Type |
Eaton FS-5205A |
|
Transmission Ratios |
|
Gear |
Ratio |
|
1St Gear |
7:52:1 |
|
2ND Gear |
4.35:1 |
|
3RD Gear |
2.54:1 |
|
4th Gear |
1.52:1 |
|
5TH Gear |
1.00:1 |
|
Reverse |
6.27:1 | |
|
Clutch |
Spring Applied w/ 14" (356 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator |
|
Gearbox |
|
Ratio |
38.2:1 |
|
Torque & Speed |
|
Torque Requirements |
|
Gear |
Ratio |
Max. Speed |
|
1st |
119,095 ft lbs (161,471 Nm) |
8 RPM |
|
2nd |
74,927 ft-lbs (101,587 Nm) |
14 RPM |
|
3rd |
43,750 ft-lbs (59,317 Nm) |
24 RPM |
|
4th |
26,181 ft-lbs (35,496 Nm) |
40 RPM |
|
5th |
17,225 ft-lbs (23,354 Nm) |
61 RPM |
|
Reverse |
107,996 ft-lbs (106,423 Nm) |
9 RPM | *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss |
|
Hydraulic System |
|
Maximum Thrust |
900,000 lbs (4,004 Nm) |
|
Hydraulic Pump |
Axial Piston Pump w/Load Sensor |
|
Gear Pump |
Piston Pump, 100cc, |
|
Maximum Pump Pressure |
4,750psi (334 bar) |
|
Maximum Pump Output |
38 U.S. Gallons (144 L)/minute |
|
Hydraulic Motors |
Two, 60 CIR, LSHT, TPR |
|
Hydraulic Push Bar Cylinder |
One, 2” Bore x 4” Stroke (8HC21004) |
|
Hydraulic Clutch Cylinder |
One, 1 ½” Bore x 4” Stroke 8HC10005) |
|
Hydraulic Thrust Cylinder |
Three, 9” Bore x 35” Stroke 8HC90035 |
|
Hydraulic Suction Strainer Filter |
Suction Strainer w/ 100 Mesh Screen |
|
Hydraulic Return Filter |
High Pressure Return Filter to 6 Micron ABS w/Replaceable Element |
|
Misc. Performance Data |
|
|
Working
Range |
24 – 54inch (607 – 1372 mm) Casing Diameter |
|
Hex Drive |
4 inch (125mm) Hex |
|
Quik Split™ |
Quik Tran™ |
|
The Quik Split™ frame design, allows the machine to be separated into sections to accommodate lighter and fasters lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning |
Quik Tran™ is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Tran's benefit will be easier machine operation in challenging work climates or conditions. |
|
Spoil Door |
|
|
With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber. |
|
|
Dimensions |
|
|
Length |
15’ 2 1/2” (4.61 m) |
|
Width |
5’ 7” (1.70 m) |
|
Height |
6’ 2” (1.87 m) |
|
Master Track Length |
15’ (4.5 m) w/1” (25 mm) back plate |
|
Extension Track Length |
10' (3 m) |
|
Weights |
|
Base Unit ( Split Weight) |
5,600 lbs (2,540 kg) |
|
Power Pack ( Split Weight) |
6,400 lbs (2,909 kg) |
|
Master Pusher |
1,300 lbs (591 kg) |
|
Master Track |
3,700 lbs (1,682 kg) |
|
Lifting Sling |
175 lbs (79 kg) |
|
Total Weight |
17,175 lbs (7,790 kg) |
|
Extension Track |
2,800 lbs (1,263 kg) each |
|
Master Saddle |
310 lbs (140 kg) |
|
This page was last updated on
Tue Aug 12, 2008.
|
