Power Train

Engine

Caterpillar C-15 Tier III Diesel

Rating

525 HP (392 kW)

Power Train Noise Rating

 

1 Meter Distance	104 dB(A)
3 Meter Distance	95 dB(A

Fuel Capacity

650 U.S. Gallons (2,460 L)

Hydraulic Capacity

220 U.S. Gallons (833 L)

Hydraulic Filter   

High Pressure Filtration to 6 Micron ABS

Battery

(2) Deka 908DMF 12 V, 1450 CCA

Carriage System

Maximum Thrust/Pullback

625,000 lbs. (283 Tonnes)

Carriage System

Rack & Pinion, (4) Pinion and Gear with Adjustable Force Limiter

Maximum Carriage Speed

120 ft. (36 m)/minute

Carriage Motors

(4) Radial Piston/Dual Displacement

Carriage Brakes

(2) Spring Applied/Hydraulic Release

Carriage Gearbox

(4) Planetary Drives

Hydraulic Pump

(2) Closed Loop-Piston             

Rotary Drive

Rotary System

(4) Pinion & Gear Drive w/Infinitely Variable Torque

Maximum Rotary Torque

80,000 ft-lbs. (108,500 Nm) @ 0 – 33 RPM

Minimum Rotary Torque

23,500 ft-lbs. (31,860 Nm) @ 0 – 90 RPM

Maximum Rotary Speed

90 RPM

Rotary Motors

(4) 160cc, Axial Piston/Variable Displacement

Rotary Brakes

(2) Spring Applied/Hydraulic Release

Fluid Course

3 in. (762 mm)

Mud Flow Rate

650 U.S. Gallons (2,460 L)/minute

Maximum Mud Pressure

1,500 psi (103 bar)

Mud Shutoff Cylinder

2 in. Bore x 6 in. Stroke (51 - 152.4 mm)

Mud Blow Down Cylinder

1 1/16 in. Bore x 4 in. Stroke (27 - 102 mm)

Hydraulic Pump

(2) Closed Loop-Piston         

Auxiliary Pump

(1) 74cc Pressure Compensated-Piston 

Slip Spindle

6 5/8 in. Pin (168.3 mm)

Wireline Commutator/Side Entry Sub

6 5/8 in. (168.3 mm) Full Hole Box 4.5 in. (114.3 mm) Pin

Mud Swivel

Rear Mounted, 5.5 in. (140 mm) F.L.H. Down Hole x 6

Other Features

Wiggle Steer™, Adjustable Torque Limiter, Digital Tachometer

Drill Rig

Drill Angle

10° - 18°

Drill Pipe

Range II – 34 ft. (10.4 m)

Pipe Support Cylinder

2 in. Bore x 4 in. Stroke (51 - 102 mm)

Guide Bushing Cylinder

4 in. Bore x 8 in. Stroke (102 - 203 mm)

Mounting

Tri-Axle Suspension Base

Axle Spacing

60 in. (1,524 mm)

Wrench

Wrench Style

Triple Jaw with 12 in. (305 mm) Separation

Maximum Breakout Torque

212,000 ft-lbs. (287,400 Nm)

Maximum Makeup Torque

140,000 ft-lbs. (189,800 Nm)

Clamp/Grip Range

3.5 in.– 10.5 in. (89 – 267 mm) OD

Top Clamp Cylinder

6 in. Bore x 16 in. Stroke (152.4 - 406.4 mm)

Top Clamp Movement Cylinder

2 in. Bore x 6 in. Stroke (51 - 152.4 mm)

Wrench Travel

Wrench can Travel the Full Length of the Thrust Frame

Hydraulic Breakout/Makeup Cylinder

8 in. Bore x 3 in.Stroke (203 - 76 mm)

Wrench Separation Cylinder

4 in. Bore x 12 in. Stroke (102 - 305 mm)

Wrench Motor

(1) Hydraulic, LSHT, 12.5 CIR

Wrench Brake

(1) Spring Applied/Hydraulic Release

Pivoting Hook Pads

Ability to Remove the Wrench w/o tools or bolts

 Safety

• Es!Lok – Exit Side Lockout System with 5,280 ft. (1,609 m) Range 
• Zap Alert – Electrical Detection Device
• Emergency Shutdown Switch at the Operators Console
• (8) Attachable Handrails for Full Length Thrust Frame Walkway
• Work Lights - (4) 500 Watt (each)

Drill Rig Dimensions

Maximum Length

55 ft. (16.8 m)

Maximum Width

8 ft. 6 in. (2.59 m)

Maximum Working Height

17 ft. (5.18 m)

Maximum Transport Height

11 ft. 6 in. (3.50 m)

 Single Power Pack Dimensions

 Maximum Length

19 ft. 8 in. (5.99 m)

 Maximum Width

8 ft. (2.43 m)

 Maximum Height

9 ft. 5 in. (2.88 m)

Drill Rig Weight

Total Weight

93,800 lbs. (42,550 kg)

Total Weight w/o Wrench

86,000 lbs.  (39,010 kg) - Wrench is Removable for Lighter Transport

 Product Options

Dual Power Pack for Run-On-One-Technology-System (ROOTS)

• Simultaneously run both power units
• Permits one power unit to run while powering through the unused power unit
• Allows one power unit to run, but keeps the unused power unit isolated
• Excercise the ability to have one power unit running, but have the unused power unit removed
• Unit maintains full power with single engine, but system runs with half rotational RPM and half carriage drive speed