MCM-4000 Performance Specifications

Power Train 

Generator Set

Caterpillar® D125-6 114kW, prime rating
480 volt, 60 Hz with 120/208 volt accessory circuit for work lights, heater, etc.

Fuel Capacity

42 US gallons (159 L)

Noise Rating

97 dB (A) without attenuation

Operating Controls

Remote Controls

Pendant for offload valve start/stop
Pendant for trash pump start/stop

Centrifugal Mud Pumps

Main Pump

Centrifugal Mud Pump

Pump Motors

(1) 3-phase electric, 30 HP (22kW)
480 V for mixing/agitation

  • Inlet Size: 6 in. (152 mm)
  • Outlet Size: 5 in. (127 mm)
  • Impeller Size: 10 in. (254 mm)

(1) 3-phase electric, 20 HP (14.9 kW)
480 V for charging of hydro-cyclones

  • Inlet Size: 4 in. (101 mm)
  • Outlet Size: 3 in. (76.2 mm)
  • Impeller Size: 10 in. (254 mm)

Bentonite Mixing System

Polyethylene constructed by bentonite mix hopper

Cleaning System

Linear Motion Shakers

1st cut with 27 sq. ft. (2.51 m2) area with (3) 50 mesh screens

2nd cut with 18 sq. ft. (1.67 m2) area with (2) 140 mesh screens

various additional mesh sizes available

1st Cut Shaker Cleaning Capacity

Estimated 300 US gallons (1,135 L)/minute

Desilting System

(7) 5 in. (127 mm) desilter
Hydr-cyclones manifold mounted

Desilting System Cleaning Capacity

Estimated 560 US gallons (2,210 L)/minute 

 *Note: Cleaning capacities will vary depending on the overall mud weight, drilling fluid mixture/content and working environment 

Tanks

1st Screening Tank

1,333 US gallons (5,045 L) capacity

2nd Cleaning Fluid/Mixing Tank

2,667 US gallons (10,095 L) capacity

Other Features

18 in. (457 mm) cleanout ports

Transport

Standard Mounting

Tandem axle pintle hitch trailer

Axle Spacing

3 ft. 6 in. (1.06 m)

Dimensions

Maximum Length

38 ft. 6 in. (11.7 m)

Maximum Height

13 ft. 3 in. (4 m)

Maximum Width

98.4 in. (2.5 m)

Weight

Total Weight

25,580 lbs. (11,603 kg)

Safety

  • Anti-slip walkways
  • (4) Walkway handrails
  • Stairway & ladder with anti-slip treads
  • Emergency shutdown switch on operator's control panel
  • Electrical grounding stake with cable
  • (2) 500 watt quartz work lights 

 *Note: All product performance specifications , components, wights, dimensions and other related information is subject to change without notice from the manufacturer.

This page was last updated on Tue Jun 14, 2011.

Please contact American Augers, Incorporated at
135 US Route 42 · P.O. Box 814 West Salem, Ohio 44287 USA
USA Toll Free: 800-324-4930 Tel: 419-869-7107 Fax: 419-869-7727

© Astec Industries, Inc. All Rights Reserved. Legal Notice | Privacy Policy | Webmaster | Site Map

In This Section
MCM-4000 Performance Specifications

MCM-4000

Related Sections
Maxi-Rig Directional Drills

Auger Boring Machines

Product Tooling and Accessories

Mud Pump & Cleaning Systems

Mid-Size Directional Drills

Oil and Gas Drilling Rigs

NEW! ISO-Style Driller's Cabins

Downloads
MCM-4000 50 Hz Operators Manual (12/27/2010)

Drilling Fluid Mixing and Cleaning Systems (12/27/2010)

MCM-4000 60 Hz Operators Manual Rev 11032008

Printable Version
Email this Page
Add to Favorites