New! Tri-plex 600GPM Pump with Rated Capacity of 600 US gallons (2,067 L) / minute Caterpillar C-15 Tier III diesel engine *Tier III or Tier 4i determined by country of purchase Stand-alone, self-powered and compatible with any drill brand Optional Quiet Pak

Performance Specifications

Power Train Engine:            Caterpillar© C-15 Tier III Diesel *Tier III or Tier 4i determined by country of purchase  Rating:             475 HP  (354 kW) Max. Speed:     2100 RPM Noise Rating:   1 Meter Distance 104 dB(A)                        3 Meter Distance 95 dB(A) Fuel Capacity:  300 U.S. Gallons (1,136 L) Transmission:   Eaton-FRO-16210B, 10 Speed Clutch:             15.5 in. (394 mm) Twin Disk Battery:           (2) Deka 908DMF 12V,1450 CCA   Pump Pump Design:       Tri-plex 600GPM Rated Capacity:     600 U.S.Gallons (2,067 L)/min. Bore x Stroke:       6 x 6 in. (152.4 x 152.4 mm) Max. Pressure:      1,505psi (1043 bar) (*Note: Pump Capacity will Vary Depending on the Overall Mud Weight, Drilling Fluid Mixture/Content, and the Working Elevation  Controls Remote Controls: Mud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn remote Remote Instruments: Digital Mud Flow Meter (gallons/liters per minute)  Dimensions/Weight Length: 20 ft. (6.096 m) Width:    8 ft. (2.49 m) Height:   9 ft. (2.7 m) Total Weight: 29,800 lbs. (13,520 kg) estimated  Accessories Pulsation Dampener on inlet and discharge (2) 25 ft. (7.6 m) suction hoses with 6 in. (152.4 mm) Kamlok Fittings (2) 25 ft. (7.6 m) Discharge Hoses with 3 in. (76.2 mm) NPT Hammer Unions Liner Wash System w/Supply Tank  24 V Work Lights

Mud Motor Specifications

Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Augers mud pumps can be used with any brand or size of directional drill Mud Motor Size   (Inch) 3-3/8    3-1/2 4-3/4 6-3/4 Mud Motor Size (Millimeter)  85.72  88.9  120.6  171.4     Flow Rate          (GPM) 30-120 75-160 100-250 300-600       Flow Rate          (LPM)  113.6 - 454.2  283.9 - 605.7  378.5 - 946.4  1,136 - 2,271

For Additional Mud Pump and Cleaning System equipment, please view the following options

MCR-10000   MPR-6000   MCM-4000  P-750/G2