|
Power Train |
|
Engine |
Deutz D914LO6 Tier III Diesel |
|
Rating |
116 HP (86.5 kW) |
|
Maximum Engine Speed |
2300 RPM |
|
Engine Torque |
|
228 ft-lbs. (309.1 Nm) |
2300 RPM |
|
276 ft-lbs. (374.2 Nm) |
1600 RPM | |
|
Maximum Noise Rating |
105 dB(A) |
|
Fuel Capacity |
18.5 U.S. Gallons (70 L) |
|
Hydraulic Capacity |
22.6 U.S. Gallons (86 L) |
|
Battery |
(1) Deka 634MF 12 V, 690 CCA |
|
Transmission |
|
Type |
Spicer E62-5A |
|
Transmission Ratios |
|
Gear |
Ratio |
|
1St Gear |
7.17:1 |
|
2ND Gear |
4.21:1 |
|
3RD Gear |
2.54:1 |
|
4th Gear |
1.45:1 |
|
5TH Gear |
1.00:1 |
|
Reverse |
7.17:1 | |
|
Clutch |
Spring Applied with 13 in. (330 mm) Diameter Single Disk/Hydraulically Assisted Clutch Actuator |
|
Gearbox |
|
Ratio |
54.2:1 |
|
Torque & Speed |
|
Torque Requirements (2300 RPM)
|
|
Gear |
Output |
Max. Speed |
|
1st |
88,604 ft-lbs. (120,102 Nm) |
6 RPM |
|
2nd |
52,025 ft-lbs. (70,540 Nm) |
10 RPM |
|
3rd |
31,388 ft-lbs. (42,560 Nm) |
17 RPM |
|
4th |
17,919 ft-lbs. (24,289 Nm) |
29 RPM |
|
5TH |
12,358 ft-lbs. (16,758 Nm) |
42 RPM |
|
Reverse |
88,604 ft-lbs. (120,102 Nm) |
6 RPM | *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss |
|
Torque Requirements (1600 RPM) |
|
Gear |
Output |
Max. Speed |
|
1st |
107,257 ft-lbs. (145,450 Nm) |
4 RPM |
|
2nd |
62,978 ft-lbs. (85,390 Nm) |
7 RPM |
|
3rd |
37,996 ft-lbs. (51,520 Nm) |
12 RPM |
|
4th |
21,691 ft-lbs. (29,410 Nm) |
20 RPM |
|
5TH |
14,959 ft-lbs. (20,280 Nm) |
30 RPM |
|
Reverse |
107,257 ft-lbs. (145,450 Nm) |
4 RPM | *These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss |
|
Hydraulic System |
|
Maximum Thrust |
600,000 lbs. (272 Tonnes) |
|
Hydraulic Pump |
Axial Piston Pump with Load Sensor |
|
Gear Pump |
57cc Piston |
|
Maximum Pump Pressure |
4,750 psi (327 bar) |
|
Maximum Pump Output |
35 U.S. Gallons (132 L)/minute |
|
Hydraulic Motors |
(2) 60 CIR, LSHT, TPR |
|
Hydraulic Push Bar Cylinder |
(1) 2 in. Bore x 4 in.Stroke (51 mm x 102 mm) |
|
Hydraulic Clutch Cylinder |
(1) 1 ˝ in. Bore x 4 in. Stroke (38 mm x 102 mm) |
|
Hydraulic Thrust Cylinder |
(2) 9 in. Bore x 35 in. Stroke (229 mm x 889 mm) |
|
Hydraulic Suction Strainer Filter |
Suction Strainer with 100 Mesh Screen |
|
Hydraulic Return Filter |
High Pressure Return Filter to 6 Micron ABS with Replaceable Element |
|
Master Pusher |
|
|
Diameter |
36 in. (914 mm) |
|
Working Range |
12 in. – 42 in. (305 – 1,067 mm) Casing Diameter |
|
Hex Drive |
4 in. (102 mm) |
|
Quik Split™ |
Quik Tran™ |
|
The Quik Split™ frame design allows the machine to be separated into sections to accommodate lighter and fasters lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning |
Quik Tran™ is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions. |
|
Spoil Door |
|
|
With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber. |
|
|
Dimensions |
|
|
Length |
12 ft. 6 in. (3.81 m) |
|
Width |
5 ft. 7 in. (1.69 m) |
|
Height |
5 ft. 9 in. (1.75 m) |
|
Master Track Length |
13 ft. (3.96 m) w/1 in. (25 mm) back plate |
|
Master Track Width |
6 ft. 3 in. (1.92 m) |
|
Centerline |
29.27 in. (744 mm) |
|
Extension Track Length |
10 ft. (3 m) |
|
Extension Track Width |
6 ft. 3 in. (1.92 m) |
|
Weights |
|
|
Base Unit (Split Weight) |
5,300 lbs. (2,404 kg) |
|
Power Pack (Split Weight) |
5,600 lbs. (2,540 kg) |
|
Master Pusher |
1,200 lbs. (544 kg) |
|
Master Track |
3,700 lbs. (1,678 kg) |
|
Lifting Sling |
300 lbs. (136 kg) |
|
Total Weight |
16,100 lbs. (7,303 kg) |
|
Extension Track |
2,800 lbs. (1,270 kg) each |
|
Master Saddle |
290 lbs. (132 kg) |
|
Misc. |
|
|
Work Lights |
(3) 12 Volt |
|
Extension Track |
(2) |
|
Master Saddle |
(1) 36 in. (914 mm) compatible |
