|
Exceptional Force * Reliable Results
|
Power Train |
|
Engine |
Caterpillar C-7 ACERT Tier III Diesel |
|
Rating |
300 HP (223 kW) |
|
Maximum Engine Speed |
2100 RPM |
|
Maximum Forward Engine Torque |
|
838 ft-lbs. (1,163 Nm) |
2100 RPM | |
|
Maximum Reverse Engine Torque |
|
773 ft-lbs. (1,048 Nm) |
2100 RPM | |
|
Fuel Capacity |
87
U.S. Gallons (329 L) |
|
Hydraulic Capacity |
90
U.S. Gallons (340 L) |
|
Battery |
(2) Deka 634MF 12 V, 690 CCA |
|
Transmission |
|
Type |
Eaton FRO112106 – 10 Speed |
|
Transmission Ratios |
|
Gear |
Ratio |
|
1St Gear |
12.69:1 |
|
2ND Gear |
9.29:1 |
|
3RD Gear |
6.75:1 |
|
4th Gear |
4.90:1 |
|
5TH Gear |
3.62:1 |
|
6TH Gear |
2.59:1 |
|
7TH Gear |
1.90:1 |
|
8TH Gear |
1.38:1 |
|
9th Gear |
1.00:1 |
|
10th Gear |
0.74:1 |
|
Reverse |
13.75:1 | |
|
Clutch |
Dual Plate, Spring Applied with 14 in. (356 mm) Diameter Twin Disk/Hydraulically Assisted Clutch Actuator |
|
Gearbox |
|
Ratio |
25.6:1 |
|
Torque & Speed |
|
Torque Requirements |
|
Gear |
Output |
Max. Speed |
|
1st |
272,236 ft-lbs. (369,103 Nm) |
6 RPM |
|
2nd |
199,296 ft-lbs. (270,209 Nm) |
9 RPM |
|
3rd |
144,806 ft-lbs. (196,330 Nm) |
12 RPM |
|
4th |
105,118 ft-lbs. (142,521 Nm) |
17 RPM |
|
5th |
77,659 ft-lbs. (105,291 Nm) |
23 RPM |
|
6TH |
55,562 ft-lbs. (75,332 Nm) |
32 RPM |
|
7th |
40,760 ft-lbs. (55,263 Nm) |
43 RPM |
|
8th |
29,604 ft-lbs. (40,137 Nm) |
59 RPM |
|
9th |
21,452 ft-lbs. (29,085 Nm) |
60 RPM |
|
10th |
15,420 ft-lbs. (20,910 Nm) |
60 RPM |
|
Reverse |
272,096 ft-lbs. (368,913 Nm) |
6 RPM |
*These are net figures. A deduction has already been taken into consideration for hydraulic and mechanical loss |
|
Hydraulic System |
|
Maximum Thrust |
1,800,000 lbs. (816 Tonnes) |
|
Hydraulic Pump |
Axial Piston Pump with Load Sensor |
|
Gear Pump |
40 CIR, LH, SAE |
|
Operating Pump Pressure |
4,000 psi (276 bar) |
|
Maximum Pump Output |
55
U.S. Gallons (209 L)/minute |
|
Hydraulic Motors |
(2) 60 CIR, LSHT |
|
Hydraulic Push Bar Cylinder |
(1) 2 in. Bore x 2 in. Stroke (51 mm x 51 mm) |
|
Hydraulic Clutch Cylinder |
(1) 1 3/4 in. Bore x 4 in. Stroke (45 mm x 102 mm) |
|
Hydraulic Thrust Cylinder |
(4) 12 in. Bore x 35 in. Stroke (305 mm x 889 mm) |
|
Hydraulic Suction Strainer Filter |
Suction Strainer with 149 Mesh Screen |
|
Hydraulic Return Filter |
High Pressure Return Filter to 6 Micron ABS with Replaceable Element |
|
Master Pusher |
|
Diameter |
84 in. (2,134 mm) |
|
Working
Range |
24 in. - 84 in. (610 - 2,134 mm) |
|
Hex Drive |
6 in. (152 mm) |
|
Quik Split™ |
Quik Tran™ |
|
The Quik Split™ frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit, and aids the operator in being able to facilitate better and safer machine positioning. |
Quik Tran© is the fast return system, made available exclusively from American Augers, as it provides up to 20,000 lbs (9,072 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. The benefit of Quik Tran will be easier and faster machine operation in challenging work climates or conditions. |
|
Spoil Door |
|
With a Safety-First commitment, all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber. |
|
|
Dimensions |
|
Length |
17 ft. (4.87 m) |
|
Width |
8 ft. 8 in. (2.69 m) |
|
Height |
9 ft. 4 in. (2.84 m) |
|
Master Track Length (Two Section Assembly) |
Total Assembly: 16 ft. (7.31 m)
- (1) 8 ft. (2.43 m) section w/1 1/2 inch (38 mm) back plate
- (1) 8 ft. (2.43 m) section
|
|
Master Track Width |
10 ft. (3 m) |
|
Extension Track Length |
(3) 8 ft. (2.43 m) |
|
Extension Track Width |
10 ft. (3 m) |
|
Centerline |
54.37 in. (1,381 mm) |
|
Weight |
|
Base Unit (
Split Weight) |
13,800 lbs. (6,260 kg) |
|
Power Pack (
Split Weight) |
21,000 lbs. (9,525 kg) |
|
Master Pusher |
4,850 lbs. (2,200 kg) |
|
Front Master Track |
5,900 lbs. (2,676 kg) |
|
Rear Master Track |
7,500 lbs. (3,402 kg) |
|
Lifting Sling |
900 lbs. (408 kg) |
|
Total Weight |
53,950 lbs. (24,470 kg) |
|
Extension Track |
6,000 lbs. (2,722 kg) each |
|
Master Saddle |
600 lbs. (272 kg) |
|
Misc. |
|
Work Lights |
(3) 24 Volt |
|
Extension Track |
(3) |
|
Master Saddle |
(1) 96 in. (2,438 mm) compatible |
|
Master Pusher Product Option |
|
Diameter |
96 in. (2,438 mm) |
|
Working Range |
24 in. - 96 in. (610 - 2,438 mm) |
|
Master Pusher Weight |
5,550 lbs. (2,517 kg) Note: All other split weights will remain the same |
|
Total Weight |
54,650 lbs. (24,790 kg) |
|
Master Saddle Weight |
800 lbs. (363 kg) |
|
Master Saddle |
(1) 96 in. (2,438 mm) compatible |
(*Note All product performance specifications, components, weights, dimensions, and other related information is subject to change without notice from the manufacturer.)
|
