Caterpillar C-18 Tier III deisel engine
*Tier III or Tier 4i determined by country of purchase

Quintiplex pump with Rated Capacity of 750 US gallons (2,839 L) / minute

Stand-alone, self-powered and compatible with any drill brand

 Performance Specifications

 Power Train

Engine:            Caterpillar© C-18 Tier III Diesel

Rating:             600 HP  (447 kW)

Max. Speed           1800 RPM

Fuel Capacity:  300 Gallon (1,136 L)

Transmission:   Eaton-RTLO-22918B, 10 Speed

Clutch:            15 1/2 in. (394 mm) Twin Disk

Battery:           (2) Deka 908DMF,12V,1450 CCA

 Pump

Pump Design:       Quintiplex, piston and liner

Rated Capacity:     750 U.S.Gallons (2,839 L)/min.

Bore x Stroke:      5.5 x 7.87 in (139.7 x 200 mm)

Max. Pressure:      1,500 psi (103 bar)

Note: Pump Capacity will Vary Depending on the Overall Mud Weight, Drilling Fluid Mixture/Content, and the Working Elevation

 Controls

Remote Controls: Mud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn remote

Remote Instruments: Digital Mud Flow Meter (gallons/liters per minute) 

Dimensions/Weight

  • Length: 25 ft.  6 in. (7.8 m)
  • Width:   8 ft. (2.49 m)
  • Height: 10 ft. (3.12 m)

Estimated Weight: 39,000 lbs. (17,690 kg)

 Accessories

  • Pulsation Dampener on inlet and discharge
  • (2) 25 ft. (7.6 m) Suction Hoses with 6 in. (152 mm) Kamlok Fittings
  • 4 in. (102 mm) NPT Hammer Union Discharge Connection
  • Liner Wash System w/Supply Tank 
  • 24 V, Dual Work Lights

 Mud Motor Specifications

 Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Augers mud pumps can be used with any brand or size of directional drill

Mud Motor Size (Inch)

3-3/8   

3-1/2

4-3/4

6-3/4

8

Mud Motor Size (Millimeter)

85.72 

 88.9

 120.6

171.4 

 203.2

Flow Rate    (GPM)

30-120

75-160

100-250

300-600

400 - 900

Flow Rate    (LPM) 

113.6 - 454.2 

283.9 - 605.7 

 378.5 - 946.4

1,136 - 2,271 

 1,514 - 3,407

    

For Additional Mud Pump and Cleaning System equipment, please view the following options

MPR-6000    MCR-10000    MCM-4000   P-600/G2

This page was last updated on Tue Aug 30, 2011.

Please contact American Augers, Incorporated at
135 US Route 42 · P.O. Box 814 West Salem, Ohio 44287 USA
USA Toll Free: 800-324-4930 Tel: 419-869-7107 Fax: 419-869-7727

© Astec Industries, Inc. All Rights Reserved. Legal Notice | Privacy Policy | Webmaster | Site Map

Related Sections
Maxi-Rig Directional Drills

Auger Boring Machines

Product Tooling and Accessories

Mud Pump & Cleaning Systems

Mid-Size Directional Drills

Oil and Gas Drilling Rigs

NEW! ISO-Style Driller's Cabins

Downloads
P-750/G2 Operators Manual

P-600 & P-750 Literature (11/9/2011)

Printable Version
Email this Page
Add to Favorites